 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High-speed Switching Transistor (-60V, -5A) 2SA1952 Features 1) High speed switching. (tf : Typ. 0.15 s at IC = -3A) 2) Low VCE(sat). (Typ. -0.2V at IC/IB= -3/-0.15A) 3) Wide SOA. (safe operating area) 4) Complements the 2SC5103. Dimensions (Unit : mm) 2SA1952 (1) 0.9 0.75 5.5 1.5 2.3 5.1 0.9 (3) ( 2) 2.3 Absolute maximum ratings (Ta = 25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits -100 -60 -5 -5 -10 1 10 150 -55~+150 Unit V V V A A(Pulse) W W(Tc=25C) C C 0.65 C0.5 0.5 1.0 0.5 1.5 2.5 9.5 2.3 0.8Min. ROHM : CPT3 EIAJ : SC-63 Packaging specifications and hFE Type Package hFE Code Basic ordering unit (pieces) 2SA1952 CPT3 Q TL 2500 Electrical characteristics (Ta = 25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage Base-emitter saturation voltage DC current transfer ratio Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) VBE(sat) hFE1 hFE2 fT Cob ton tstg tf Min. -100 -60 -5 - - - - - - 120 40 - - - - - Typ. - - - - - - - - - - - 80 130 - - - Max. - - - -10 -10 -0.3 -0.5 -1.2 -1.5 270 - - - 0.3 1.5 0.3 Unit V V V A A V V V V - - MHz pF s s s Conditions IC = -50A IC = -1mA IE = -50A VCB = -100V VEB = -5V IC/IB= -3A/ -0.15A IC/IB= -4A/ -0.2A IC/IB= -3A/ -0.15A IC/IB= -4A /-0.2A VCE = -2V , IC = -1A VCE = -2V , IC = -3A VCE = -10V , IE = 0.5A , f = 30MHz VCB = -10V , IE = 0A , f = 1MHz IC = -3A , RL = 10 IB1 = -IB2 = -0.15A VCC -30V Transition frequency Output capacitance Turn-on time Storage time Fall time www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/2 2009.12 - Rev.A 6.5 (1) Base(Gate) (2) Collector(Drain) (3) Emitter(Source) 2SA1952 Electrical characteristics curves -5 -10 0mA Data Sheet AA 0m m -9 -80 COLLECTOR CURRENT : IC (A) -70mA Tc =25C COLLECTOR CURRENT : IC (A) -10 -5 -2 -1 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 0 -50mA DC CURRENT GAIN : hEF -4 -60mA Ta=100C 25C -25C VCE= -2V Pulsed 1000 500 200 100 50 20 10 5 2 Ta=100C 25C -25C VCE= -2V Pulsed -3 -40mA -30mA -20mA -2 -1 -10mA IB=0A 0 0 -1 -2 -3 -4 -5 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 BASE TO EMITTER VOLTAGE : VBE (V) 1 -0.01 -0.02 -0.05 -0.1 -0.2 -0.5 -1 -2 -5 -10 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (A) Fig.1 Ground emitter output characteristics Fig.2 Ground emitter propagation characteristics Fig.3 DC current gain vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) BASE SATURATION VOLTAGE : VBE(sat) (V) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) -10 -5 -2 -1 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -0.01 -0.02 -0.05 -0.1 -0.2 -0.5 -1 VCE(sat) Ta= -25C 25C 100C VBE(sat) 1000 TRANSITION FREQUENCY: fT (MHz) 10000 5000 2000 1000 500 200 100 50 20 10 -0.1 -0.2 -0.5 -1 -2 IC/IB=20 Pulsed 500 200 100 50 20 10 5 2 1 0.001 0.002 0.005 0.01 0.02 0.05 0.1 Ta=25C VCE= -10A Ta=25C f=1MHz IE=0A Ta=100C 25C -25C -2 -5 -10 0.2 0.5 1 -5 -10 -20 -50 -100 COLLECTOR CURRENT : IC (A) EMITTER CURRENT : IE (A) COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.4 Collector-emitter saturation voltage vs. collector current Base-emitter saturation voltage Fig.5 Resistance ratio vs. emitter current Fig.6 Collector output capacitance vs. collector-base voltage 10 5 TURN ON TIME : ton(s) STRAGE TIME : tstg(s) FALL TIME : tf(s) IE=20IB1= -20IB2 tstg ton tf 2 1 0.5 0.2 0.1 0.05 0.02 0.01 -0.05 -0.1 -0.2 -0.5 -1 -2 -5 -10 -20 -50 COLLECTOR CURRENT : IC (A) Fig.7 Switching characteristics www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/2 2009.12 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of 2SA195209
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |